www.auto-innovations.net
10
'23
Written on Modified on
Eberspacher News
SUSTAINABLE STAINLESS STEEL FOR CLEAN MOBILITY
Purem by Eberspaecher, together with its strategic partners Outokumpu and thyssenkrupp Materials Processing Europe, has further intensified its cooperation with regard to CO2-reduced stainless steel.
Exhaust systems for commercial vehicles: Reducing CO2 footprint by using sustainable stainless steel for clean mobility.
Purem by Eberspaecher has started using “Circle Green” to reduce emissions from the automotive industry. This sustainable stainless steel has an up to 92 percent lower carbon footprint compared to the industry average. Outokumpu offers the world’s first towards-zero stainless steel. The Circle Green achieves a level of less than 0,6 tCO2e/t steel driven by improvements in the production process, such as the use of a higher recycling rate, CO2-free energy sources, as well as CO2-optimized distribution channels.
Purem by Eberspaecher is aware of its responsibility towards the environment and society and is therefore intensifying the cooperation: “With clear goals for a CO2 neutral production by 2030 and becoming a CO2 neutral company in the future, we drive forward proactively the use of sustainable materials in our products. Towards zero emissions, stainless steel plays a major role in our current products as well as future innovations for new drive technologies like the hydrogen engine”, underlines Uwe Ackermann, Vice President Global Procurement, Purem by Eberspaecher.
The partner Outokumpu highlights: “We are committed to circular economy. No other stainless steel manufacturer has achieved such low emission levels throughout the entire production chain from raw material extraction to final production. We are happy to intensify the collaboration with Purem by Eberspaecher, offering solutions to strive more sustainable mobility”, says Niklas Wass, Executive Vice President, Stainless Europe, Outokumpu.
The first shipment of the material was already delivered by service partner thyssenkrupp Materials Processing Europe to the Purem by Eberspaecher Wilsdruff plant. Here, the more sustainable stainless steel will be processed into commercial vehicle exhaust systems with a reduced CO2 footprint. This is an important step towards reducing Scope 3 emissions at Purem by Eberspaecher.
“As a strong service partner – especially in the automotive sector – thyssenkrupp Materials Processing Europe is actively addressing the ambitious challenges and targets in the industry. Our teams accompany the innovative research and development of our customers from the very beginning and support them within the supply chain to achieve the formulated emission targets. As a central link between manufacturer and Purem by Eberspaecher, we look forward to the further development in the automotive segment and are pleased to be able to accompany our long-standing customer as a partner at their side for this milestone”, says Marcus Woehl, CEO, thyssenkrupp Materials Processing Europe.
Purem by Eberspaecher is using the Outokumpu “Circle Green” sustainable stainless steel to minimize emissions within the automotive industry.
Overall sustainability approach with clear targets
Adapted purchasing strategies – that include Outokumpu standard stainless steel with the highest recycling rate in Europe and producing with green energy (1,7 tCO2e/t Steel) – will achieve just in Europe further savings of up to 12 percent in CO2 emissions this year. Thus, the approach to use Circle Green in the future is a consistent continuation of the supplier's sustainable purchasing strategy. Advanced talks are currently underway with key automotive manufacturers to use CO2 reduced as well as Circle Green in series production. In this way, Purem by Eberspaecher is actively shaping the transformation towards sustainable materials.
Purem by Eberspaecher has started using “Circle Green” to reduce emissions from the automotive industry. This sustainable stainless steel has an up to 92 percent lower carbon footprint compared to the industry average. Outokumpu offers the world’s first towards-zero stainless steel. The Circle Green achieves a level of less than 0,6 tCO2e/t steel driven by improvements in the production process, such as the use of a higher recycling rate, CO2-free energy sources, as well as CO2-optimized distribution channels.
Purem by Eberspaecher is aware of its responsibility towards the environment and society and is therefore intensifying the cooperation: “With clear goals for a CO2 neutral production by 2030 and becoming a CO2 neutral company in the future, we drive forward proactively the use of sustainable materials in our products. Towards zero emissions, stainless steel plays a major role in our current products as well as future innovations for new drive technologies like the hydrogen engine”, underlines Uwe Ackermann, Vice President Global Procurement, Purem by Eberspaecher.
The partner Outokumpu highlights: “We are committed to circular economy. No other stainless steel manufacturer has achieved such low emission levels throughout the entire production chain from raw material extraction to final production. We are happy to intensify the collaboration with Purem by Eberspaecher, offering solutions to strive more sustainable mobility”, says Niklas Wass, Executive Vice President, Stainless Europe, Outokumpu.
The first shipment of the material was already delivered by service partner thyssenkrupp Materials Processing Europe to the Purem by Eberspaecher Wilsdruff plant. Here, the more sustainable stainless steel will be processed into commercial vehicle exhaust systems with a reduced CO2 footprint. This is an important step towards reducing Scope 3 emissions at Purem by Eberspaecher.
“As a strong service partner – especially in the automotive sector – thyssenkrupp Materials Processing Europe is actively addressing the ambitious challenges and targets in the industry. Our teams accompany the innovative research and development of our customers from the very beginning and support them within the supply chain to achieve the formulated emission targets. As a central link between manufacturer and Purem by Eberspaecher, we look forward to the further development in the automotive segment and are pleased to be able to accompany our long-standing customer as a partner at their side for this milestone”, says Marcus Woehl, CEO, thyssenkrupp Materials Processing Europe.
Purem by Eberspaecher is using the Outokumpu “Circle Green” sustainable stainless steel to minimize emissions within the automotive industry.
Overall sustainability approach with clear targets
Adapted purchasing strategies – that include Outokumpu standard stainless steel with the highest recycling rate in Europe and producing with green energy (1,7 tCO2e/t Steel) – will achieve just in Europe further savings of up to 12 percent in CO2 emissions this year. Thus, the approach to use Circle Green in the future is a consistent continuation of the supplier's sustainable purchasing strategy. Advanced talks are currently underway with key automotive manufacturers to use CO2 reduced as well as Circle Green in series production. In this way, Purem by Eberspaecher is actively shaping the transformation towards sustainable materials.
www.eberspaecher.com
